Massager Troubleshooting

1. No vibration, the main reason is that the power lead, the fuse is open; the plug or switch is in poor contact; the motor is broken or the coil is open, etc.
2. The adjustment of the vibration intensity fails, the common reasons are: the intensity switch is bad, the lead wire is open, the rectifier diode is damaged, etc.
3. Abnormal noises during use, the main reason is that the distance between the fixed iron core and the movable iron core is too close; the rubber pad between the two iron cores is damaged or lost.
4. The vibration is too weak or too strong, the main reason is that the distance between the two iron cores is not adjusted properly.
5. The motor runs normally but does not vibrate. The main reason is that the eccentric hammer falls off, and it only needs to be reinstalled.